User guide

Technician’s Handbook
56
4. Enter the number of the DDI target (maximum of 6
digits).
5. Set the Day and Night Service options.
6. Select Global CLI if you want outgoing calls from a
target extension to display the Calling Line Identifier
(CLI) number.
7. Click Save.
Lastly, set the DDI Digit conversion for outgoing calls
1. Click Management and then click Outgoing DDI
Digit Conversion.
2. Select the DDI Digit (index number) of the line.
3. Click Change.
4. Select the Converted Digit Parameter to change the
extension numbers back to the correct DDI range.
5. Click Save.
Enable least cost call routing (LCCR)
PrNet is more flexible than LCCR and allows multiple
alternate routes and least cost call routing on local calls.
1. In the system tool, choose Voice from the Selection
menu.
2. Click Management, click Least Cost Routing and
then click Change.
3. Enter the LCCR access digits, authorization code,
and override code (supplied by the Service Provider)
and then click Save.
4. Click Least Cost Routing Exceptions and then click
Add.
5. Program any exception numbers that you do not want
routed over LCCR and then click Save.
6. Click Lines and then click Least Call Routing.
3100 Hand.bk Page 56 Monday, August 19, 2002 8:49 PM