User guide

Programming
51
Programming
Program the incoming access (ring maps)
After programming the extensions and extension groups
through the group administration tool, program the lines
from the system tool.
Ring maps determine which extensions or extension
groups receive the incoming calls from a line. Ring maps
are configured on a per-line basis. Every line requires a
ring map.
To program incoming line access you must configure the
•line parameters
• ring maps
• ring map types.
Configure the analog line parameters
1. Choose Voice from the Selection menu.
2. Click Lines and then click Analog Configuration.
3. Select the line and click Change.
4. Set the required line parameters.
5. Click Save.
Configure the ring maps
1. Click Lines and then click Ring Map.
2. Select the line and click Change.
3. Configure the Day and Night Entries for the line.
4. Click Save.
Configure the ring map type
1. Click Lines and then click Ring Map Type.
2. Select the line and click Change.
3100 Hand.bk Page 51 Monday, August 19, 2002 8:49 PM