User guide

Programming
45
Programming
Changing the system-wide settings
1. Choose System from the Selection menu.
2. Click System Wide Setting and then click Change.
3. Set the following:
– Enable or disable authorization failure lockout
– Leave IP set registration enabled (only applies to
quick install tool)
– Enter the name for the system
– Select either internal or external Music On Hold
source.
4. Click Save.
Identify the power source of the IP phones
IP phones that can either receive their power from the
controller power supply or from a power adaptor that
connects to the phone. Only the following phones require
a power adapter:
• 5140 IP Appliances that are connected to an
expansion unit
• IP phones that have an IRDA module or PKM
attached.
Identify if the sets will receive power from an adaptor or
from the controller.
1. Choose System, and then click IP Sets Powering.
2. Select the port of the phone and click Change.
3. Check the Phantom Feed box if the set will be
powered from the controller (default).
4. Click Save.
5. Proceed to Program the online services (p. 46).
3100 Hand.bk Page 45 Monday, August 19, 2002 8:49 PM