User guide

Installation

Verify the system

Complete the following procedure to verify that the

system is working properly.

The system is shipped from the factory with your licensed

options enabled.

1. Dial 675 on each IP phone. The extension number

appears in the phone display. Record the extension

numbers. The 5140 IP Appliances display their exten-

sion number automatically.

2. Verify that you can make calls between the IP

phones.

3. Connect an analog phone into the first ONS port on

the controller.

4. Verify that you make a call from an IP phone to the

analog phone (extension 1100).

5. If your system includes LS/CLASS lines, connect an

LS/CLASS line to the first LS/CLASS port on the

controller.

6. Place a call into the system and verify that the call

rings either the first IP phone (PBX mode) or all IP

phones (key system mode).

7. Verify that you can place an external call. Dial 9 to

access an external line.

8. If you cannot perform all of the above tasks, check

your cable connections. If the problem persists, see

Checking the system LEDs (p. 141)

9. Proceed to Programming (p. 37).

3100 Hand.bk Page 35 Monday, August 19, 2002 8:49 PM