User guide

Troubleshooting and Repair
159
Troubleshooting
and Repair
Figure 20: Flash card
7. Insert the replacement card. Ensure that the small lip
on the edge furthest from the connector faces down
towards the rear of the main unit, so that the card
mates correctly with the socket. Push it fully into the
socket.
8. Replace the controller cover.
9. Reconnect the uplink cable to the expansion unit.
10. Reconnect the power cord and switch the unit on.
11. Restore the database and software. See Restoring
the database/software and database (p. 154).
3100 Hand.bk Page 159 Monday, August 19, 2002 8:49 PM