User guide

Technician’s Handbook
144
Stop Bits: 1
Flow Control: None
7. Click OK.
8. Type the Enter key to display the Hyperterminal
prompt.
Checking the bootup script
To check the bootup script
1. With the Hyperterminal application connected and
running, power down the 3100 ICP system and then
power it on again.
2. Watch the data that appears in the Hyperterminal
window during bootup
– Database errors in the bootup script indicate that
you need to perform a database restore. See
Restoring the database/software and database
(p. 154).
– Errors referencing ATA1 indicate a faulty hard
drive. See Replacing a faulty hard disk (p. 160).
– Errors referencing ATA0 indicate a faulty flash.
See Replacing the flash card (p. 158).
3100 Hand.bk Page 144 Monday, August 19, 2002 8:49 PM