User guide

Technician’s Handbook
132
10. In IP Routing Table page, set the following
– IP Address: 000.000.000.000
– Bit Mask: 0.0.0.0
– Next Hop Address: enter the IP address of the
gateway device (router, gateway, firewall)
11. Click Save.
12. Under Destination, click Remote Security and then
click Add.
13. In the Remote Security page, set the following
– Destination: RAS
– Protocol: PAP
– Remote Name: enter “mn3100” as dial up
username
– Remote Secret: enter “mn3100” as dial up
password
– IP Address: select Override Address With:
– Override Address With: enter 134.22.11.249
– Connect As: select Server
14. Click Save.
15. In the Destinations folder, click Remote Connection
and then click Add.
16. In the Remote Connection page, set the following:
– Destination: RAS
– Enable Link: Select check box
– Call Type: Incoming
17. Click Save.
18. Click Destinations, select RAS in the right pane, and
then click Change.
19. Check the Enable Destination option box.
3100 Hand.bk Page 132 Monday, August 19, 2002 8:49 PM