User guide

Configuring the IP Network
101
Configuring the
IP Network
Local subnet mask: 255.255.255.0
Operation mode: server and gateway
External access mode: dedicated
Ethernet network ethernet adapter: (choose the
other device)
External interface configuration: (obtain from ISP)
DHCP server configuration: Off
Master DNS server: (leave blank)
Proxy server: No
3. After installing the 6000 SBAP, log in to the server
manager from your browser at the following URL:
http://192.168.0.2/server-manager
4. Enter your username and password
User: admin
Password: (as set during installation)
5. In the Workgroup pane, set “Workgroup and Domain
Controller to “Yes”
6. From the “Servicelink -> Status” panel, enter the
Service Account and click Register.
7. From the “Administration ->Blades” panel, install the
“IP-Phone-Support” blade.
8. Refresh the browser window to display the
“Administration ->IP phone” support panel.
9. Open the “Administration->IP phone” page and then
set “IP phone support for 3100” to “enabled” and then
click Save.
10. In the “Workgroup” panel. set “Workgroup and
Domain Controller” to “yes”.
11. In the “Local Networks” panel, add the following new
local network:
Network Address: 192.168.1.0
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
12. Next, configure the 3100 ICP.
3100 Hand.bk Page 101 Monday, August 19, 2002 8:49 PM