User guide

Technician’s Handbook

Figure 12: Connecting the 6000 SBAP to layer-2 switch port

2. When you install the 6000 SBAP, set the console

settings in the following order:

Primary domain name: (choose a domain)

System name: mitel6000

Local network ethernet adapter: (choose a device)

Local IP address: 192.168.1.251

Local subnet mask: 255.255.255.0

Operation mode: server and gateway

External access mode: (choose an access mode)

Ethernet network ethernet adapter: (choose the

other device)

External interface configuration: (obtain from ISP)

DHCP Server configuration: ON

Master DNS server: (leave blank)

Proxy server: No

3. After installing the 6000 SBAP, log in to the server

manager from your browser at the following URL:

http://192.168.1.251/server-manager

3100 Hand.bk Page 98 Monday, August 19, 2002 8:49 PM