User guide

Mitel 3000
Administrator’s Manual
57
From a standard phone dial 4321 to enter the pager number and dial string.
Selecting the Extensions that can activate Remote Notification
In default no extension can set remote notification. Those extensions that can set remote notification are
programmed in system programming.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Select “Remote Notification”.
• Select the extensions that are to be allowed to record calls.
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Remote Notification”.
• Select “Simultaneous Calls”.
• Enter the value 1 or 2 and press “Confirm”.
The default value is set at 1.
Selecting the Number of Retry Attempts
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Remote Notification”.
• Select “Retry attempts”.
• Enter the value from 2 to 15 and press “Confirm”.
The default value is set at 2.
Selecting the Line Group that the Remote Notification calls are to use
The outgoing line group to be used for remote notification calls can be changed.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Remote Notification”.
• Select “Outgoing group”.
• Select the group.
Notification delay timer
The time interval between receiving a message and making the first remote notification attempt is
programmable. This is set at 15 minutes (900 seconds) in default and can be set between 1 and 30 minutes
(60 - 1800 seconds).
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Timers”.