User guide

Mitel 3000
Administrator’s Manual
127
The following table lists the available “Lines” options, with their defaults, if applicable.
Feature Default Notes
Equipped Lines All Lines equipped See page 93.
Group Programming
• Ring Group
• Hunt Group
Groups 1 with first 8 extensions,
groups 2 - 20 with extension 20
only
See page
37.
Incoming Ringing Group 1 for all Lines and
Accesses
See page 36.
Outgoing Restriction No restrictions See page 24.
Incoming Calls Only No restrictions See page 25.
Outgoing Groups All Lines in group 1 See page 38.
PBX Group Not programmed See page 91.
System Voice Box Not programmed See page 61 & page 114
LCR Codes
• LCR on
• LCR off
None programmed See page
75.
LCR Timebands
• LCR On Time
• LCR Off Time
• LCR Weekend
Not Programmed See page
76.
PSTN Programming
• Tone Dialing
• Loop calling
• Caller ID Detection
• Dialtone detection
• Long CO Line
• Line Name
On by default
Off by default
On by default
On by default
Off by default
See page
101.
See page
100.
See page
101.
See page
101.
PRI programming T1/PRI Card required
Call Routing Priority Not programmed See page 115
T1 (RBS) or PRI (ISDN) T1/PRI Card required See page 105
T1 Channels Not programmed See page 105
System Voice Mailbox VM Module required See page 60
CID / ANI Table Not programmed See page 69 & page 115.
DID/DNIS Table Not programmed See page 69 & page 115.