User guide

Mitel 3000
Administrator’s Manual
125
The following table lists the available “Extensions” options, with their defaults, if applicable.
Feature Default Notes
Name programming None programmed See page 83.
Restriction classes
• Day class-of-service
• Night class-of-service
All extensions in Class 1. See page
85.
Tone Protect Extensions do not accept tone See page 81.
Page Protection Extensions accept paging See page 73.
Open Door Restriction All extensions enabled See page 88.
Individual Caller ID List No stores programmed See page 71.
Sys. Speed Dial. Override No override programmed See page 85.
Voice Mail Boxes
• Standard Voice Boxes
• Information Only VB
Not programmed See page
50.
Extension disconnect All extensions connected See page 94.
VM Capacity % Used Not applicable See page 60.
No Call Logging Not programmed See page 89.
External Forwarding
• No Trunk-to-Trunk calls
• All Calls
• External calls only
All calls See page
33.
Examine Passwords
• Extension lock password
• Voice Mail password
• System voice mailbox
Default 123
Default 1111
Default 1111
See page
94.
Restrict Use Of PA All extensions can make
announcements
See page 73.
Port Swapping Not programmed See page 95.
Hot Line Not programmed See page 83.
Manager/Assistant Not programmed See page 73.
Tele-secretary Not programmed See page 117.
20 Hz ringing 50 Hz ringing See page 96.
Reverse Cadence Not set See page 96.
Keypad Confirmation All set See page 96.
Flexible Numbering Not set See page 97.
DSS extensions Extension 20 –27 set. All
others not set
See page 19.
Call Recording Not set See page 55.
Barge-In
• Allowed to Barge-In
• Protected from Barge-In
• Barge in Tone
Not set See Page
65.
Paired Extensions Not Set See Page 66.