Specifications

Mitel 3000
Installation & Maintenance Manual
91
and called by dialling the group code.
Group 1 (180)
Group 2 (181)
Group 3 (182)
Group 4 (183)
Group 5 (184)
Group 6 (185)
Group 7 (186)
Group 8 (187)
Group 9 (188)
Group 10 (189)
Group 11 (190)
Group 12 (191)
Group 13 (192)
Group 14 (193)
Group 15 (194)
Group 16 (195)
Group 17 (196)
Group 18 (197)
Group 19 (198)
Group 20 (199)
You can allocate extensions to the group and to designate the type of group: a Ring group or Hunt group. When a
group is programmed, it can be associated with lines, Caller ID numbers and the Door Phone. If a group is
programmed and no lines, Caller ID numbers or Door Phone are associated with it, it is an Internal group. A total
of 20 groups can be programmed. The first group is programmed with extensions 20-27 at Power Up. A
maximum of 16 extensions can be programmed for a group.
All groups can be called from other extensions.
1. From the programming extension, press the PROGRAM key.
2. Press the Scroll Down key () until “System Programming” is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select “Group Programming”.
5. The 20 groups are shown. Select the group.
6. Two options are shown Ring Group and Hunt Group. Select “Ring Group”. The menu showing the equipped
extensions is displayed. Select those extensions to be programmed in the group.
7. If Hunt Group is chosen select the type of hunt group, Linear, Circular or Longest Idle.
8. Enter the extensions into the group. The order in which the extensions are entered determines the sequence in
which unanswered calls are presented to extensions in the group. The call will be presented to the first
available extension and if not answered there then the next one in the order in which they are programmed.
Incoming Ringing Programming
By associating lines with groups or individual extensions, you can have lines ringing different groups, or
individual extensions, in day and night modes.
1. From the programming extension, press the PROGRAM key.
2. Press the Scroll Down key () until “System Programming” is displayed.
3. Select “System Programming”.
4. Enter the System Programming Password and select “Lines”.
5. Select “Incoming Ringing”.
6. Select the line.
7. Select “Day”, “Night”, or “Day and Night”.
8. If the line is to ring an individual extension, select “Extension” and then the required extension. If the line is
to be presented to a group, select “Group” and then the required group.
Press the speakerphone key to finish programming.
The default is that all lines ring group 1 in both day and night modes.