Specifications

Mitel 3000
Installation & Maintenance Manual
64
“Extensions” programming options.
Feature Default Notes
Name Programming Not programmed See page 79.
Restriction Classes
• Day Class-Of-Service
• Night Class-Of-Service
All extensions in Class 1. See page
79.
Tone Protect All extensions protected See page 80.
Page Protection All extensions not protected See page 80.
Open Door Restriction No restrictions See page 80.
Individual Caller ID List Not programmed See page 80.
Sys. Speed Dial Override All extensions off See page 80.
Voice Mail Boxes
• Standard Voice Boxes
• Information Only VB
All extensions off See page
81.
Extension Disconnect All extensions connected See page 81.
VM Capacity % Used Not applicable See page 75.
No Call Logging All extensions off See page 70.
External Forwarding
• No Trunk-to-Trunk
calls
• All Calls
• External Calls Only
All Calls See page 82.
Examine Passwords
• Ext. Lock Password
• Voice Mail Password
• System Voice Mail Box
123
1111
1111
See page
82.
Restrict Use Of PA No restrictions See page 83.
Port Swapping Not programmed See page 83.
Hot Line Not programmed See page 83.
Manager/Assistant Not programmed See page 83.
Tele-Secretary (See Note Below) Not programmed See page 85
20 Hz Ringing All extensions off See page 85.
Reverse Cadence All extensions on See page 85.
Keypad Confirmation All extensions on See page 85.
Flexible Numbering Not programmed See page 86.
DSS Extensions Extensions 20 –27 on; all others
extensions off
See page 88.
Call Recording All extensions off See page 88.
Barge-In
• Barge-In Extensions
• Barge-In Protection
• Barge-In Tone
No extensions programmed
No extensions protected
Tone On
See page
88.
Paired Extensions
• Master Extension
• Alternate extension
No extensions paired
See page
89.
NOTE: The Telesecretary option is presented when a T1 / PRI module is installed. It is not shown if the
system is equipped with CO Lines only.