User guide

Troubleshooting Tools
55
Example: Sampling every 2 minutes – reporting every 30 minutes.
Explanation of fields:
Status – Records the status at the end of the sampling period.
- Connected: Connected to remote node.
- Local: Local node performing the measurement
- Disconnected: Disconnected from remote node.
- Config Error: Connected to remote node but some configuration information is miss-
ing. Either the node is not present in Form 48 or there is no route to this node in Form
23.
Delay - End to end signaling delay between the nodes.
- Average: Average over time period
- Maximum: Maximum measured delay
Samples
- #Req: Number of samples requested.
- #Conn: Number of samples where a connection was discovered.
- #Slow: Number of samples where the connection was above the acceptable
maximum signalling delay.
Interpretation:
- Connection to Node 21: OK
- Connection to Node 1: Has excessive network delays and should be investigated.
- Connection to Node 41: Was disconnected for the entire report and remained so at
the end of the report.
- Connection to Node 146: Node 146 was disconnected for part of the report (possibly
was reset).
- Connection to Node 200: Either Node 200 does not appear in Form 48 correctly or
there is no route to Node 200 in Form 23.