User guide

SX-200 MyAdministrator User Guide

IP Voice Networking Statistics

SX-200 MyAdministrator gathers statistics related to IP trunk performance, delays during peak

periods, and outages in the network on a SX-200 ICP system connected to the LAN. This tool

is dependant on SX-200 ICP Release 1.0 or greater software. You must start this tool in order

to obtain statistics, and stop this tool before restarting.

Start IP Voice Networking Statistics

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. On the menu bar click Tools, IP Voice Networking Statistics, and then click Start. The

Start IP Networking Statistics window opens.

3. Select values for the following data:

- Sample Interval - monitors every 2, 5, 10, or 15 minutes. The default is 5.

- Reporting Period - reports statistics every 10, 30, or 60 minutes. The default is 60.

- Maximum Delay - sets the maximum acceptable delay in 10 second increments from

100 to 500 milliseconds. The default is 180.

- Duration - collects statistics for 1-99 hours. the default is 24.

4. Click OK.

Stop IP Voice Networking Statistics

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. On the menu bar click Tools, IP Voice Networking Statistics, and then click Stop. A

confirmation window opens.

3. Click OK.

Read IP Voice Networking Statistics

Note

You can read the statistics when you are connected or disconnected from the site.

1. On the menu bar click Tools, IP Voice Networking Statistics, and then click Read. A

Open IP Voice Networking Statistics window shows the .stat files.

2. Open IPVoiceNetworking.stat. The report is a read-only file, and you can save it to another

directory or print it.

Users should look over this report and check that all of the nodes that should be connected are

shown as Connected. If the network is engineered well and the system is not under unusual

stress, the number of slow samples should also be 0.

See the following example with the explanation of the fields, and the interpretation of the data.