User guide

SX-200 MyAdministrator User Guide
40
Tenant Groups
About Tenant Groups
Grouping telephones in a tenant group allow the members in the tenant group to share the
same system services. The SX-200 system can have a maximum of 25 tenant groups. This
means that up to 25 small businesses, or departments of a larger business, can share services.
Each tenant group can be provided with customized features that fit their needs.
Change the Tenant Group
1. Connect to the system site of the telephone user. See Connect to a System Site.
2. Double click on the Phone Data icon. The Phone Data window opens.
3. In the Phone Data window, select Programmed.
4. In the left column, align your mouse pointer beside the circuit address that you want to
program and click.
5. Click Modify. The Extension window opens.
6. In the Properties box, select Advanced Properties.
7. In the Tenant box, select the number of the Tenant Group.
8. Click Submit.
9. Click Close.
Paging Group
About Paging Groups
Grouping telephones in a paging group allows a person to page all these telephones at the
same time via their telephone speakers. The connection(s) are one-way audio to each
telephone in the paging group, and are terminated when the paging party hangs up. A telephone
being paged in this manner may originate and receive calls - when this occurs, the paging on
that telephone is terminated.
A party can initiate a group page only if they are a member of the paging group.
Only one group page may be performed to a paging group at any one time.
If a telephone was listening to background music, a group page will cause the music to be
turned off. The music will be turned on again when the paging is terminated.
The SX-200 system can have up to 50 paging groups. The default setting is <none>.