User guide

Telephone Features
33
Line Preference - Allows you to choose whether or not the system will use that line when
the set goes off-hook to originate a call. The preferred line can be the Prime line key (Key
Line), CO Line key, CO Line Group key, Multicall line key, Private line key (Private Trunk)
or Personal O/G line key.
10. Click Submit.
11. Click Close.
Program Call Forwarding
Tip
You need to know the extension number of the telephone that you want to program and the extension
number(s) of the telephone(s) that will accept the call forwarding.
Note
The Extension window allows you to direct the call forwarding for Call Forward Always, Call Forward Busy,
and Call Forward No Answer for Internal Calls and External calls. The programming available depends on
the call forwarding Class of Service options enabled.
To allow the user to enable or disable the various call forwarding modes, call forwarding toggle keys can
be programmed on the telephone set. See Program Feature Keys.
1. Connect to the system site of the telephone user. See Connect to a System Site.
2. Double click on the Phone Data icon. The Phone Data window opens.
3. In the Phone Data window, select Programmed.
4. In the left column, align your mouse pointer beside the circuit address that you want to
program and click.
5. Click Modify. The Extension window opens.
6. In the Properties box, select Call Forwarding.
7. Click the check box beside the type(s) of call forwarding that you wish to enable.
8. Enter the extension number(s) of the telephones that will receive the calls that are
forwarded.
9. Click Submit.
10. Click Close.
Program Class of Service
1. Connect to the system site of the telephone user. See Connect to a System Site.
2. Double click on the Phone Data icon. The Phone Data window opens.
3. In the Phone Data window, select Programmed.
4. In the left column, align your mouse pointer beside the circuit address that you want to
program and click.
5. Click Modify. The Extension window opens.
6. In the Properties box, select Advanced Properties.
7. In the Class of Service box, select the number of the Class of Service.
8. Click Submit.
9. Click Close.