User guide

SX-200 MyAdministrator User Guide

Identify the Telephone

Tip

Before proceeding you should know the circuit address (Bay, Slot, Circuit) or the extension number of the

telephone that you want to identify.

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. Double click on the Phone Data icon. The Phone Data window opens.

3. In the Phone Data window, select Programmed.

4. In the left column, align your mouse pointer beside the circuit address that you want to

identify and double click. If a set is selected, the Extension window opens. The Extension

window identifies the set and provides access to the properties and features of the tele-

phone. If a PKM Interface Unit was selected, a PKM Interface Unit window opens and

from there you can choose a PKM 1 or PKM2 address and identify the features.

Program Features Like Another

Note

The Program Like feature copies the Feature keys of a set but not the Line keys. The Class of Service, the

Class of Restriction, and Paging Group is also copied. The Hunt Group and the Pickup Group is not copied.

Tips

Before proceeding you should know the circuit address (Bay, Slot, Circuit) or the extension number of the

telephone that you want to program and the extension number of the telephone set that you want the

programming to be similar to.

If you are programming a new telephone like another, simply double click on an unprogrammed telephone

in the Phone Data window in order to obtain Program Like in the Add a New Phone window.

1. Remove the existing telephone that you want to program from the Phone Data window

using the Remove a User procedure

2. Add the telephone that you wish to program using the Add a New User procedure. Make

sure to choose the Program Like programming option in the Add a New Phone window.

Program User Name

Tip

Before proceeding you should know the circuit address (Bay, Slot, Circuit) or the extension number for the

telephone that you want to program.

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. Double click on the Phone Data icon. The Phone Data window opens.

3. In the Phone Data window, select Programmed.

4. In the left column, align your mouse pointer beside the circuit address that you want to

program and double click. The Extension window opens.

5. In the Name box, enter the user name (maximum 10 characters). If you want to add the

job description or the department name enter the information (maximum 15 characters) in

the Comments box.

6. Click Submit.

7. Click Close.