User guide

Telephone Sites

Change Extension Number

Tips

Before proceeding you should know the circuit address (Bay, Slot, Circuit) or the extension number for the

telephone that you want to program.

To save time looking for an extension number, click on the word Extension in the Phone Data window. The

window will arrange all of the extension numbers in numerical order.

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. Double click on the Phone Data icon. The Phone Data window opens.

3. In the Phone Data window, select Programmed.

4. In the left column, align your mouse pointer beside the telephone that you want to program

and click.

5. Click Modify. The Extension window opens.

6. Edit the extension number.

7. Click Submit.

8. Click Close.

Program Associated Device

You can associate a modem or a SUPERSET DSS module to a telephone programming the

Associated Device box in the Extension window. You can also associate a PKM Interface Unit

(DSS/BLF Interface Unit) to an attendant console programming the Association box in the PKM

Interface Unit window.

If you are associating a device to a telephone, you must know the circuit address (Bay, Slot,

Circuit) or the extension number for that telephone. Associating a modem, requires you to know

the ONS Port extension. Associating a SUPERSET DSS Module or a PKM Interface Unit

requires you to know their extension number.

1. Connect to the system site of the telephone user. See Connect to a System Site.

2. Double click on the Phone Data icon. The Phone Data window opens.

3. In the Phone Data window, select Programmed.

4. In the left column, align your mouse pointer beside the telephone or PKM Interface Unit

that you want to program and click.

5. Click Modify. If a telephone was selected in step 4, the Extension window opens. If a PKM

Interface Unit was selected the PKM Interface Unit window opens.

6. If associating a device to a telephone, in the Extension window select Advanced

Properties, and in the Associated Device box enter the extension number for the asso-

ciated device. You can enter a maximum of five digits (0-9, *, or #). If associating a PKM

Interface Unit to an attendant console, in the PKM Interface Unit window enter the exten-

sion number of the attendant console in the Association box.

7. Click Submit.

8. Click Close