Technical information

Programming

Programming Call Rerouting

1. Call Rerouting Always Alternative Assignment form

! For First Always Alternative Number 1

— Leave all values as “Normal”

! For each Always Alternative Number

— Change “No Reroute” to “Reroute” for the

required originating device(s).

— Enter the directory number to which calls should

reroute.

2. Call Rerouting First Alternative Assignment form

! For First Alternative Number 1

— Leave all values as “Normal”.

! For other First Alternative Numbers

— If calls from an originating device type are to

reroute to the First Alternative in Busy or Do Not

Disturb conditions, set the value to “This”.

— If calls from an originating device type are to

reroute to the First Alternative in No Answer

conditions, set the value to “This”.

— If calls from an originating device type are to

reroute directly to the Second Alternative in Busy

or Do Not Disturb conditions, set the value to

“Last”.

— If calls from an originating device type are to

reroute directly to the Second Alternative in No

Answer conditions, set the value to “Last”.

— Enter the directory number to which calls should

reroute.