Technical information

Technician’s Handbook
198
3. Enter PARTITION from the inactive plane.
This message appears:
ENTER <YES> to proceed with PARTITION, <NO> to
cancel request.
Enter YES.
This message appears:
System PARTITION completed.
4. Make a DATA SAVE to RSD from the inactive plane (see
page 164).
5. If you have the Message Center option, save message
center messages to RSD (see page 165).
6. Record your login usernames, passwords, and alarm
thresholds.
7. If required, record SUPERCONSOLE 1000 firmkey
programming.
8 Log on to the inactive plane and select customer data
entry mode.
9. Select System Forms from the Forms Group Menu.
10.Select the Dimension and Feature Select form from the
System Forms menu. Press the <edit form> softkey.
11.Ensure all options match those on the SX-2000 Feature
Options Record sheet (X = YES).
12. Verify that the machine configuration is FD2 and that the
maximum number of cabinets is set to 12.
13. Press the <generate> softkey, followed by the <bottom>
softkey.
14.Enter the MITEL options password (from the SX-2000
Feature Options Record sheet received with the
software; press the <commit> softkey, then the
<confirm> softkey.
This message appears:
Changes committed. ** Reload the system to make new values
effective. **