Specifications

X-2000 General Information Guide

0 Revision A 5000309

Hardware

• Hardware units are easily removed and replaced.

Note: Defective items should be repaired by an Authorized Repair Center (not by field personnel).

• The FRUs (power supply, cards, converters, etc.) are easy to change, easily accessible

for service, and their locations are readily identified

• FRUs within the hardware unit can be easily plugged into place and require no soldering

to facilitate their replacement

• Doors can be removed quickly and require no critical alignment or special tools to re-install

• Cables which connect the FRUs use connectors which can be easily detached, securely

fastened, and readily identified

• Software/firmware visibility is provided for the use of service and support personnel.

Software

The software provides

• a means to readily identify software modules and their modification level

• a means to readily identify the software release level

• a software fix (patches or modules) procedure that allows easy application (either locally

or remotely)

• captured software diagnostic data (error logs/data, dumps, traces, etc.) which can be easily

retrieved (either locally or remotely).

Printer Support

You can print a file from anywhere in the system. There is a separate print queue for each

printer in the main controller mass storage system. Any console or Maintenance Terminal user

may print a file on any printer in the system. After a requested file is printed the system displays

a message for the user.

Diagnostics

The system performs four types of on-line and off-line diagnostic check to ensure that all aspects

of the system are functioning properly. Faulty units are removed from service. Tests include

the following:

• Power-up

• Warm start

• Background

• Directed.