Specifications

S
X-2000 General Information Guide
5
8 Revision A 5000309
7
Reminder Reminder lets you program your set to ring and provide a message at a
specified time within the 24-hour period.
Ringer Control Ringer Control lets you adjust the volume and pitch of the telephone ringer.
Ringing - Discriminating Discriminating Ringing lets you distinguish between incoming internal calls,
incoming trunk calls, tie line calls, and Callbacks by using different ringing
patterns (cadences).
Ringing - Discriminating
(Optional)
Optional Discriminating Ringing lets you change the Discriminating Ringing
patterns on ONS/OPS lines so that you hear internal ringing (1 second on and
3 seconds off) for both internal and external calls.
Ringing Line Select Ringing Line Select lets you answer any ringing line by going off-hook.
Rotary Dial to DTMF
Conversion
See Pulse-To-Tone Conversion, page 57.
SNMP Agent Simple Network Management Protocol (SNMP) governs the management and
monitoring of network devices and their functions.
Speaker Volume Control Speaker Volume Control lets you adjust the volume of the telephone speaker.
Speed Call Keys Speed Call Keys let you store and dial frequently-used numbers by using the
personal keys on your telephone.
Speed Call - Pause When the system encounters a Pause while dialing a Speed Call string, the
system ceases dialing for the duration of the Pause. When the Pause ends,
dialing resumes.
Speed Call - Personal Personal Speed Calls let you store and dial frequently-used numbers by using
access codes and index numbers.
Speed Call - System System Speed Call lets you dial stored system numbers.
Speed Dial See Speed Call (above).
Station Message Detailed
Accounting (SMDA)
Station Message Detailed Accounting (SMDA) lets the system accumulate
meter pulses (up to an assigned buffer size) that can be read, printed, and
cleared from a console. You can collect meter pulses by using either a device
(device meter unit accumulation) or an account code (account code meter unit
accumulation).
Station-To-Station Dialing Station-To-Station Dialing lets you dial any other station directly.
Suite Service Suite Service is provided by Pickup Groups (set Auto Answer On to "Yes").
SUPERSET Loop Test The SUPERSET Loop Test lets you verify the operation of the telephone keys
and displays and the integrity of the data path to the switch. The tests are
performed from the set (normally after initial system installation).
Swap Swap lets you temporarily suspend a telephone call while you originate a new
call. Once the new call has been established, you can alternate between the two
calls.
Switchhook Flash See Flash - Switchhook, page 54.
Standard Features (continued)
Page 10 of 12