User Manual

22 Model 57i CT Installation Guide

Customizing your 57i CT Base Unit

There is a list of configuration options, accessed by pressing the

button.

Setting your Options

1. . Press the Options key on the phone to enter the options list.

2. To go to an Option, use and to scroll through the list, or press the

number corresponding to the Option.

3. Press the Show softkey, the button, or press the digit number of the

corresponding option to select an option.

4. Use the softkeys to change a selected option.

5. Press the Done softkey at any time to exit the option and save the change.

6. Press the Cancel softkey, the button, or the

N button at any time

to exit without saving changes.

You can change the following options on the 57i and 57i CT:

Language

Select a language that you would like your phone to use for displaying

prompts and menus.

Note: Supported languages may vary depending on configuration. Contact your

Network Administrator for list of available languages.

Note: Supported languages may vary.

Time and Date

Use these options to set the local time on the phone. Depending upon the

configuration, time set here may be overwritten by the time on your phone

system. If you are having problems with this, contact your Network

Administrator.

• Time Server

Talk to your Network Administrator before making changes to this option.

If the Time Server option is enabled, the display shows the IP address

where the phone is getting time and date information from on the

Network. Whenever the phone starts up, it will automatically

attempt to find the Time Server. If the Time Server is not found and

unknown to the phone, the IP address will display as 0.0.0.0, and the

time and date in the main screen displays the equivalent of “12:00 am

Jan. 1st 2000". If the Time Server option is disabled, the display shows

“Network Time Disabled”. You can set the time and date manually on

your phone.

•Set Time

This option shows the Network time, if the Time Server option is

enabled. It also allows you to set the time manually.

Note: if you set the time manually, the phone will not try to synchronize the time with a

timeserver until the next time it is restarted.