Instruction manual

Setting Room Call Restrictions

You can restrict guests from placing local or long distance calls from their room phones. The

procedure you use to set call restrictions depends on whether the hotel/motel is using a Property

Management System.

If the hotel/motel is NOT using a Property Management System

1. Press Function.

2. Press [G

UEST ROOM].

3. Dial the room number.

4. Press [S

TATUS].

5. Do one of the following:

• Press [I

NTERNAL] to allow internal calls only.

• Press [L

OCAL] to allow internal and local calls.

• Press [L

ONG DIST] to allow internal, local, and long distance calls.

If the hotel/motel is using a Property Management System

1. Press Function.

2. Press [G

UEST ROOM].

3. Dial the room number.

4. Press [R

ESTRICT O/G].

The phone is restricted from making outgoing trunk calls. To remove the restriction and allow

outgoing calls, repeat the procedure.

Blocking Room-to-Room Calls

You can use the Block key on the console to bar calls between guest rooms. Only room phones

programmed with call blocking will be affected by this; ask your communications department

for further information.

To block room-to-room calls:

• Press Block.

The lamp above the Block key lights and stays lit until blocking is canceled.