Instruction manual

Setting System Date and Time
41
Setting System Date and Time
You can change the date and time appearing on the console display. The time displays either
in 12- or 24-format depending on system programming.
To set the time:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [S
ET TIME].
4. Enter the current time using four digits (hh:mm).
For example, for 9:30 enter 0930.
5. Press [PM] if applicable.
[PM] appears only if the system is set to 12-hour format, and the hour entered is in the
range 01 – 12.
6. Press [S
ET].
[S
ET] appears only if the time has been entered correctly. You can use the key to
make corrections.
7. Press [E
XIT].
To set the date:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [S
ET DATE].
4. Enter the current date in day/month/year format.
For example, for December 12, 2009, enter 121209.
5. Press [S
ET].
6. Press [E
XIT].