Instruction manual

Viewing System Alarm Information

An alarm indicator on the display means a fault in the telephone system has occurred. You can

read information about the nature and location of the fault from the console.

To read an alarm message:

1. Press Function.

2. Press [A

LARM].

The display shows, for example:

3. Record all the alarm information.

• Press [M

ORE...] to display additional information or other alarms (if any).

• The Alarm indicator will continue to flash until all alarm messages have been displayed.

• Contact your communications department.

4. Press [E

XIT].

The system may be programmed to raise an alarm when an extension is left off-hook without

a call too long. If so programmed, the console will ring with no calls waiting. To cancel the alarm

and stop the ringing, press Function followed by [S

HOW LOCKOUT], and then press [CLEAR].