User's Guide
3
Model / User Guide
Setting up the 480i CT
SIP Settings
If you have a proxy server or have a
SIP registrar present at a different
location than the PBX server, the
following settings may need to be
changed.
1. Proxy IP - The proxy server’s IP
address
2. Proxy Port - SIP proxy server’s port
number. By default this number is
set to 5060
3. Registrar IP - Set this to the IP
address of the registrar
4. Registrar Port - SIP registrar’s port
number. By default this is set to 5060
5. Log IP - The IP address of the
computer to which the messages
should be sent. This setting is used
for debugging purposes only.
6. Log Port - The port number that the
log messages will be sent. This
setting is used for debugging
purposes only
Note: Configuring the Log IP and Port
does not log the messages sent to or
received by the phone automatically.
A software application that listens to
the port and at that Log IP is neces-
sary to handle the data that is sent.
7. User Name - This is used for
communication purposes in the SIP
protocol
8. Display Name - The string that
should be used to display on the
480i CT. Some PBX systems use this
for the display and some overwrite
this with the string that is set in the
system
9. Auth Name - The authorization
name that is used to register at the
IP PBX
10.Password - The password that is
used to register at the IP PBX
Note: The IP PBX administrator creates the
Auth Name and Password. Contact
your IP PBX administrator to obtain
this information.
Phone Status
1. Network Status
Shows the network status of the
two Ethernet ports at the back of
the phone. You can also view the
phone’s IP and MAC addresses.
a. IP Addr - Shows the IP address
of the phone
b. MAC Addr - The MAC or the
hardware address of the 480i CT’s
Ethernet card
2. Firmware Version
Gives the firmware version
information that is installed
currently on the 480i CT
3. Reset Phone
Reboots the phone. A reset may be
necessary when the network
settings or the settings for the
extension on the IP PBX system are
modified
4. Factory Default
Sets the phone back to the factory
default settings including the
network settings. Performing this
operation will lose all modified
settings
Note: For information on other settings in
the options list of the phone, please
refer to the Aastra 480i CT Installation
Guide provided with the 480i CT.