User's Guide

Model / User Guide 34
Appendix A: Parameter Settings
SIP Settings:
The following section contains the
settings specific to SIP.
These parameters are self-explanatory and
should be
configured accordingly
sip proxy ip
sip proxy port
sip registrar ip
sip registrar port
sip line1 auth name
sip line1 password
sip line1 group name
sip line1 user name
sip line1 display name
sip line1 screen name
sip line2 auth name
sip line2 password
sip line2 group name
sip line2 user name
sip line2 display name
sip line2 screen name
sip line3 auth name
sip line3 password
sip line3 group name
sip line3 user name
sip line3 display name
sip line3 screen name
sip line4 auth name
sip line4 password
sip line4 group name
sip line4 user name
sip line4 display name
sip line4 screen name
sip line1 mode
sip line2 mode
sip line3 mode
sip line4 mode
sip dial plan
The regular expression used to configure
the dialplan.
example:
sip dial plan:
“011xxxxxxxxx|101xxxx1xxxxx
xxxxx|1[2-9]xxxxxxxxx|[2-
9]xxxxxxxxx|xx+*|xx+#|*xx
|#xx+#”
Where,
0, 1, 2, 3, 4, 5, 6, 7, 8, 9:
is a Digit symbol
'x’: matches any digit symbol (wildcard),
‘+’: matches zero or more of the preceding
digit symbol or [] expression
[]: Symbol inclusive OR
‘-’: used only with [], represent a range of
acceptable symbols
‘*’, ‘#’ match the keypad symbols.
sip digit timeout
Represents the time in seconds to
configure the timeout between consecutive
key presses.
example:
sip digit timeout: 4
Softkey Settings:
The following section contains the
softkey settings specific to SIP. On the
480i CT phone with SIP seven softkeys
can be configured. These parameters
can be configured either in the
Aastra.cfg or the <mac>.cfg file. The
syntax is as follows:
softkeyN type: type
softkeyN label: string
softkeyN value: value
Where,
N: is the softkey number (1-7) on the
phone that is being configured, type: can
be any one of the following: line, blf
(blinking light field), voicemail,
forward or speeddial, and
Value: is the value of the soft key (depends
upon the softkey context)