User's Guide

31
Model / User Guide
Appendix A: Parameter Settings
Appendix A:
Parameter Settings
Note: The parameter settings in the
<mac>.cfg configuration file take
precedence over the parameter set-
tings in the aastra.cfg. Any text fol-
lowing a number sign (#) on a line is
considered to be a comment, unless
the # is contained within double-
quotes. Currently, boolean fields
used are 0 for false and 1 for true.
Network Settings:
This section consists of the network
setting parameters and are self-
explanatory.
dhcp
Flag to enable or disable DHCP.
(0: Disable, 1: Enable)
ip
IP address of the device
subnet mask
The network's subnet mask
default gateway
The network's default gateway.
dns1
dns2
Primary and secondary dns server's IP
addresses
tftp server
The IP address of the tftp server
sip nat ip
sip nat port
Currently we do not have nat support.
Phone can make calls but cannot receive
them.
sip registration time
Indicates in secs, how often the sip phone
should send a re-register request to the sip
server.
example:
sip registration time: 300
Time Server Settings:
The following section contains the
parameters to configure settings
specific to the time server
time server disabled
Should the time server be disabled? 0:
False, 1: True
example:
time server disabled: 0
time reserved
not used
dst config
flag to enable or disable time serving
(0: disable, 1: enable)
time server1
primary time server's IP address.
Can be an ntp too.
time server2
secondary time server's IP address.
Can be an ntp too.
time server3
tertiary time server's IP address.
Can be an ntp too.
time format
(0: 12hr, 1: 24hr)
date format
0: WWW MMM DD
1: DD-MMM-YY
2: YYYY-MM-DD
3: DD/MM/YYYY
4: DD/MM/YY
5: DD-MM-YY
6: MM/DD/YY
7: MMM DD
example:
date format: 5
time zone name
time zone code