User's Guide

Model / User Guide

Using the 480i CT Cordless Handset

Status Messages

Handset Keys

Softkeys ( { or })

Your 480i CT cordless handset has 2 softkeys directly under the LCD display. The

softkey menus will change depending on the phone’s state, displaying relevant

softkeys only. These softkeys are pre-programmed for the call handling and

extension management features.

Talk /Hold v Key

The Talk/Hold key v is a multi-purpose key with the following uses:

• To initiate a call by seizing the line or through pre-dial.

• To answer a call during ringing.

• To place a call on hold during an active call.

Hold v Key

Pressing the hold key v while on a call will place the call on hold. While a call is

on hold, and if there are no other active calls, the LED will ﬂash at the hold rate

and the display will present the Call is on hold prompt. In addition, held call

reminder tone will be played in the form of a short ring burst (ﬂash ring).

This handset is equipped with an auto-hold feature. While on an active call,

pressing any other line key will result in the current line being placed on hold and

the new line being seized.

Release Key ( ∫ )

The release key is a multi-purpose key with the following uses:

• To end a call.

Note: If handset is placed in the charger cradle, it will also end the call.

• To silent the ringing during an incoming call.

• To exit feature such as Menu (options), Directory, Callers, Redial, Predial.

Note: Pressing this key in a feature will not terminate an active call.

Mute Key ( æ )

Use the mute key when you want to be able to hear a caller but have

them not hear you. Press the

æ key to mute the handset. Press the æ key again

to disengage mute. The Microphone mute prompt is displayed when mute is

activated.

Redial Key ( ß)

The Redial key displays a list of the last 10 calls made from the handset. Use the

Ï and Â to scroll through the list.

Display Message Description

Microphone mute Indicates when the Mute button has been Activated

Out of range Appears brieﬂy when pressing a key if out of range of the base

station