Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware2 in. x 2 in. x 6 in. G185 12-Gauge Angle

Concrete & Masonry

MiTek

Product Catalog

Anchoring Epoxy

CIA-GEL 6000-GP Epoxy

CIA-GEL 6000-GP is a superior epoxy specically designed for general purpose structural applications that require

quick load times and for doweling applications requiring state DOT approval. It is a two-component (1:1 ratio)

adhesive epoxy with 100% solids and is solvent free, moisture insensitive, non-sag and odorless. It provides

exceptional strength in anchoring and doweling applications and can be used in temperatures between 35°F and 110°F.

The epoxy has a two year shelf life when stored in unopened containers at temperatures between 40°F and 95°F.

Applications:

• Doweling applications for rebar and tie bars for full depth concrete pavement repairs

• Anchoring and bracing for short term tensile load where dynamic, vibratory, wind or intermittent loads exist

• Use in concrete, grout lled block and unreinforced masonry for general purpose anchoring and

doweling applications

• Concrete doweling road repairs where DOT approval is required.

Codes: Multiple State DOT listings, Tested to AC-58 standards – Compliant to ASTM C881-10

CIA-EA Epoxy Acrylate

CIA-EA Adhesive Anchoring System is an epoxy acrylate specically designed to be a high strength, fast cure structural

adhesive for anchoring threaded rod and deformed rebar into uncracked concrete. It has the added advantage of being

formulated to be used in colder temperatures (32°F) while maintaining excellent owability. CIA-EA may also be used

with fully grouted CMU and reinforced brick construction. It is a 2-component, 100% solids, moisture insensitive

adhesive that is ideally suited for a wide range of applications. It is composed of a proprietary blend of solvent free

epoxy acrylate resin and is backed by independent research and testing. The epoxy has a 15 month shelf life when

stored in unopened containers at temperatures between 41°F to 77°F.

Applications:

• Anchors All-Thread rod into concrete

• May also be used to anchor rebar, starter bars and dowels

• Applications requiring fast cure times

• Cold weather applications

• Can be used in horizontal anchoring applications

• Can be used in overhead anchoring applications (requires special inspection)

Codes: IBC, NSF/ANSI Standard 61

Incredi-Bond

Epoxy

Incredi-Bond

is a high strength two-component epoxy specically designed to be a bonding agent for almost

all household materials including wood, steel, concrete, brick, stone and CMU block. It is moisture insensitive and

can also be used to ll cracks in concrete, block and stone. The epoxy has a 2 year shelf life when stored in

unopened containers in dry conditions between 40°F to 90°F.

Applications:

• Bonding applications for: Concrete • Brick • CMU block • Stone • Metal • Wood

• Repair vertical and overhead cracks in concrete (non-structural)

• Repair vertical and overhead spalls in concrete (5/8" deep & 3" diameter max)

• Non-sag consistency makes this ideal for corner repairs to concrete and block walls

• Repair and replace brick

• Replace pool tile (no need to empty pool)

• Fill holes and cracks

• Not recommended for structural applications

Available Sizes:

9.4 oz. – EA-10

Available Sizes:

8.6 oz. – IB-9

Available Sizes:

21.2 oz. – GEL6GP-22