Use and Care Manual

316
Copyright © 2018 MiTek Industries, Inc. All Rights Reserved
General Hardware
General Hardware
MiTek
®
Product Catalog
SB Shelf Brackets
This shelf bracket combines shelving capabilities
and closet rod support in a one-piece design.
Materials: 13 gauge
Finish: Zinc Plated
Typical SB12 installation
Typical KSCT68 installation
SB12
KSCT68
Ref. No. Qty Type
SB12 SBV 13 8 10d --
1
)
NAILS: 10d nails are 0.148" dia. x 3" lon
g
.
MiTek USP
Stock No.
Steel
Gauge
Code
Ref.
Fastener Schedule
1
The Corner Tie secures three-way wood-to-wood
connections. Handy for building workbenches, utility
tables, or shelving using 2x4 lumber.
Materials: 14 gauge
Finish: G90 galvanizing
Installation:
• Use (12) #10 panhead screws to fasten the KSCT68
to wood framing.
KSCT Corner Tie
Qty
Screws
KSCT68 -- 14 12 #10 panhead --
MiTek USP
Stock No.
Steel
Gauge
Code
Ref.
Fastener Schedule
Ref.
No.
11"
11"
12"
6"
8"
2"
Typical WT22
installation
WT22
WT Wall Tie
Materials: 22 gauge
Finish: G90 galvanizing
Options: See chart for Corrosion Finish Options
Installation:
• Use nails appropriate for intended use. See Product
Notes, page 18.
• The opposite end must be bonded in the mortar joint
of brick facade.
• Check local codes for spacing requirements.
• Wall tie shall be bent at nail, bonding into mortar joint.
Ref. No. Description W L Qty Type
WT22 BTB Straight Edge - Duplex 22 7/8 6-1/2 1 10d --
1)
NAILS:
10d nails are 0.148" dia. x 3" long.
Code
Ref.
MiTek USP
Stock No.
Steel
Gauge
Corrosion
Finish
Fastener
Schedule
1
Dimensions (in)
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish
Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
1" space
between brick
and sheathing
L
W