Use and Care Manual

214
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
Dimensions (in)
Ref. No. W H D A Qty Type Qty Type 100% 115% 125% 100% 115% 125%
1-3/4 x 5-1/2 HUS175 HU1.81/5 x 16 1-13/16 5-3/8 3 2 -- 14 16d 6 16d 2760 3140 3400 2045 2430 2765 2990 1640
Min 12 4 1850 2085 2235 760 1625 1835 1900 610
Max 16 8 2465 2780 2980 1190 2165 2445 2620 960
HUS177 -- x 16 1-13/16 7-1/8 3 2 -- 22 16d 8 16d 4170 4745 5125 2990 3670 4130 4130 2410
Min 18 6 2770 3125 3355 1170 2440 2645 2695 955
Max 24 10 3695 4170 4320 1900 3020 3165 3255 1545
HD17925IF -- x 14 1-13/16 9-1/8 -- 1-1/8 -- 18 16d 6 10d x 1-1/2 2770 3125 3355 1170 2440 2645 2695 950 --
HDQ179IF HUCQ1.81/9-SDS x 14 1-13/16 9 3 13/16 -- 8 WS3 4 WS15 3340 3605 3605 1110 2980 3010 3010 925
HUS179 HUS1.81/10 x 16 1-13/16 9-1/8 3 2 -- 30 16d 10 16d 5580 6060 6060 4110 4555 4880 4910 3410
Min 22 6 3390 3625 3685 1170 2555 2645 2695 955
Max 30 12 4320 4515 4640 1900 3255 3425 3535 1550
HD17112IF -- x 14 1-13/16 11-3/8 -- 1-1/8 -- 22 16d 6 10d x 1-1/2 3390 3625 3685 1170 2555 2645 2695 955 --
HDQ17112IF HUCQ1.81/11-SDS x 14 1-13/16 11 3 13/16 -- 10 WS3 6 WS15 3340 3340 3340 1580 2890 2890 2890 1365
HUS179 HUS1.81/10 x 16 1-13/16 9-1/8 3 2 -- 30 16d 10 16d 5580 6060 6060 4110 4555 4880 4910 3410
Min 28 8 3790 3920 4005 1510 2790 2905 2975 1220
Max 36 14 4580 4810 4955 1900 3485 3685 3815 1555
HD1714IF -- x 14 1-13/16 13-5/16 -- 1-1/8 -- 28 16d 8 10d x 1-1/2 3790 3920 4005 1510 2790 2905 2975 1220 --
HDQ1714IF -- x 14 1-13/16 13-3/8 3 13/16 -- 12 WS3 6 WS15 4660 4870 4955 2035 3355 3525 3635 1680
HUS179 HUS1.81/10 x 16 1-13/16 9-1/8 3 2 -- 30 16d 10 16d 5580 6060 6060 4110 4555 4880 4910 3410
Min 28 8 3790 3920 4005 1510 2790 2905 2975 1220
Max 36 14 4580 4810 4955 1900 3485 3685 3815 1555
HD1714IF -- x 14 1-13/16 13-5/16 -- 1-1/8 -- 28 16d 8 10d x 1-1/2 3790 3920 4005 1510 2790 2905 2975 1220 --
HDQ1714IF -- x 14 1-13/16 13-3/8 3 13/16 -- 12 WS3 6 WS15 4660 4870 4955 2035 3355 3525 3635 1680
Min 14 6 2155 2430 2610 1170 1895 2140 2295 950
Max 20 10 3080 3475 3725 1510 2710 3055 3200 1210
THDH27925 -- x 12 2-3/4 9-1/8 4 2-1/2 -- 46 16d 12 16d 9020 9020 9020 4345 7515 7850 7850 3480
Min 16 8 2465 2780 2980 1190 2165 2445 2620 950
Max 24 12 3695 4170 4435 1900 3250 3665 3930 1530
THDH27112 -- x 12 2-3/4 10-7/8 4 2-1/2 -- 56 16d 14 16d 9710 9710 9710 4345 7795 7795 7795 3490
1) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2) WS15 structural wood screws are 1/4" dia. x 1-1/2" long, WS3 structural wood screws are 1/4" dia. x 3" long and are included with HDQ hangers.
3) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation.
New products or updated product information are designated in blue font.
11-3/16 2-1/2
13-5/16
16d 10d x 1-1/2
16d 10d x 1-1/2
16d
2-1/2
10d x 1-1/2
10d x 1-1/2
2-1/2
1-1/8
1-1/8
1-1/8
IBC,
FL,
LA
IBC,
FL,
LA
10d x 1-1/2
1-1/8
1-3/4 x
11-1/4 - 11-7/8
HU9 x 14 1-1/8
2-11/16 x
11-1/4 - 16
2-11/16 x
9-1/4 - 14
1-3/4 x 16
1-3/4 x 14
2-3/4 HU2.75/12 x 14
HD17112
2-1/2
16d14 1-13/16 11-3/8 HU11 x 1-1/82-1/2
14
1-13/16
HU14,
U14
x 14
HU7 x 14
1-3/4 x 9-1/2
1-3/4 x 7-1/4
HD1770
HD17925
2-3/4
10d x 1-1/29-1/8
7-1/81-13/16 2-1/2 10d x 1-1/2
16d
16d
2-1/21-13/16
1-1/8
Joist Size
(in)
Code
Ref.Ga
Web
Stiff
Reqd
Header Joist
DF/SP Header
Allowable Loads (Lbs.)
S-P-F Header
Allowable Loads (Lbs.)
Uplift
1
160%
Uplift
1
160%
Min/
Max
Fastener Schedule
2,3
MiTek USP
Stock No.
IBC,
FL,
LA
IBC,
FL,
LA
IBC,
FL,
LA
HD1714
HD27925
HD27112
HD1714 16d
9-3/16
HU14,
U14
x 14 1-13/16 13-5/16
HU2.75/10 x
SCL Charts Face Mount Hangers
Continued on next page
H
W
D
A