Use and Care Manual
224
MiTek
®
Product Catalog
Copyright © 2020 MiTek Industries, Inc. All Rights Reserved
EWP Hangers
EWP Hangers
Top Mount Hanger Charts
Fastener Schedul
e
5
Uplif
t
2
DF/SP
Ref. No. Ga W H D L TF Type Qty Type LVL PSL LSL SPF DF/SP
160%
THO35112 -- -- 16 3-9/16 11-1/4 2-3/8 -- 2-1/2 4 6 10d 2 10d x 1-1/2 2370 2370 2370 2370 2050 2370 230
BPH35112 BA3.56/11.25 x 12 3-9/16 11-1/4 2-3/8 -- 2-3/8 4 6 16d 4 10d 3100 3100 3100 2380 -- 3100 850
HBPH35112 HB3.56/11.25 x 10 3-9/16 11-1/4 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHXU35112
WP3.56 H=11.25,
HWP3.56 H=11.25
x 7 3-9/16 11-1/4 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH35112 HGLTV3.56/11.25 x 7 3-5/8 11-1/4 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
THO35118 ITS3.56/11.88 -- 18 3-9/16 11-7/8 2-3/8 -- 2-1/2 4 6 10d 2 10d x 1-1/2 2525 2525 2525 2265 2050 2525 230
THO17118-2 MIT411.88 x 16 3-9/16 11-7/8 2-3/8 -- 1-9/16 4 6 16d 6 10d 2740 2860 2920 1815 2430 2430 1135
BPH35118 BA3.56/11.88 x 12 3-9/16 11-7/8 2-3/8 -- 2-3/8 4 6 16d 4 10d 3100 3100 3100 2380 -- 3100 850
HBPH35118 HB3.56/11.88 x 10 3-9/16 11-7/8 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHM35118 WP3.56 H=11.875 x 7/10 3-5/8 11-7/8 2-1/2 7 3 2 -- 16d 2 10d 3335 3335 3335 2535 -- 3335 --
PHXU35118
HWP3.56 H=11.875,
HWPH3.56 H=11.875
x 7 3-9/16 11-7/8 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH35118
HGLT4 H=11.875,
HGLTV3.511
x 7 3-5/8 11-7/8 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
THO35120 -- -- 18 3-9/16 12 2-3/8 -- 2-1/2 4 6 10d 2 10d x 1-1/2 2525 2525 2525 2265 2050 2525 230
BPH3512 -- x 12 3-9/16 12 2-3/4 -- 3 4 6 16d 6 10d 3050 3050 3050 2345 -- 3050 1140
HBPH3512 HB3.56/12 x 10 3-9/16 12 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHXU3512 -- x 7 3-9/16 12 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH3512 HGLTV3.512 x 7 3-5/8 12 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
3-1/2 x 13 THO35130 -- -- 18 3-9/16 13 2-3/8 -- 2-1/2 4 6 10d 2 10d x 1-1/2 2525 2525 2525 2265 2050 2525 230
THO35140 ITS3.56/14 -- 18 3-9/16 14 2-3/8 -- 2-1/2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1835 2400 2400 230
TFI414 MIT414 -- 16 3-9/16 14 2-1/2 -- 2-1/8 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2075 -- 2715 215
BPH3514 BA3.56/14 x 12 3-9/16 14 2-3/4 -- 3 4 6 16d 6 10d 3050 3050 3050 2345 -- 3050 1140
HBPH3514 HB3.56/14 x 10 3-9/16 14 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHM3514 WP3.56 H=14 x 7/10 3-5/8 14 2-1/2 7 3 2 -- 16d 2 10d 3335 3335 3335 2535 -- 3335 --
PHXU3514
HWP3.56 H=14,
HWPH3.56 H=14
x 7 3-9/16 14 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH3514
HGLT4 H=14,
HGLTV3.514
x 7 3-5/8 14 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
THO35160 ITS3.56/16 -- 18 3-9/16 16 2-3/8 -- 2-1/2 4 8 10d 2 10d x 1-1/2 2400 2400 2400 1835 2400 2400 230
TFI416 MIT416 -- 16 3-9/16 16 2-1/2 -- 2-1/8 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2075 -- 2715 215
BPH3516 BA3.56/16 x 12 3-9/16 16 2-3/4 -- 3 4 6 16d 6 10d 3050 3050 3050 2345 -- 3050 1140
HBPH3516 HB3.56/16 x 10 3-9/16 16 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHM3516 WP3.56 H=16 x 7/10 3-5/8 16 2-1/2 7 3 2 -- 16d 2 10d 3335 3335 3335 2535 -- 3335 --
PHXU3516
HWP3.56 H=16,
HWPH3.56 H=16
x 7 3-9/16 16 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH3516
HGLTV4 H=16,
HGLTV3.516
x 7 3-5/8 16 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
TFI418
HIT418,
MIT418
-- 16 3-9/16 18 2-1/2 -- 2-1/8 4 2 16d 2 10d x 1-1/2 2715 2715 2715 2075 -- 2715 215
BPH3518 BA3.56/18 x 12 3-9/16 18 2-3/4 -- 3 4 6 16d 6 10d 3050 3050 3050 2345 -- 3050 1140
HBPH3518 HB3.56/18 x 10 3-9/16 18 3-1/2 -- 3 6 16 16d 10 16d 6310 6310 6310 5035 -- 6310 2705
PHM3518 WP3.56 H=18 x 7/10 3-5/8 18 2-1/2 7 3 2 -- 16d 2 10d 3335 3335 3335 2535 -- 3335 --
PHXU3518
HWP3.56 H=18,
HWPH3.56 H=18
x 7 3-9/16 18 3-1/4 10 2-1/2 4 4 16d 6 10d 5910 5910 5910 4535 -- 5910 1120
HLBH3518
HGLTV4 H=18,
HGLTV3.518
x 7 3-5/8 18 6 12 3-1/8 3 12 NA16D-RS 6 16d 10045 10045 10045 7705 -- 10045 1420
1) When I-joist is used as a header, all header nails must be 10d (0.148") x 1-1/2.
2) Uplift loads have been increased 60% for wind or seismic loads; no further increase shall be permitted
3) Some listed loads may be increased for short-term loading. Refer to MiTek code evaluation reports for details.
4) When I-Joists with flanges less than 1-1/2" thick are used as headers, the reduction factor for 1-1/4" flange is 0.69 and 0.84 for 1-3/8" flange.
5) NAILS: 10d x 1-1/2 nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, NA16D-RS nails are 0.148" x 3-1/2" long, 16d nails are 0.162" dia. x 3-1/2" long.
Load tables address hanger/header/fastener limitations only. Joist limitations must be determined for each installation
.
New products or updated product information are designated in blue fon
t
.
IBC,
FL,
LA
3-1/2 x 18
Header
3-1/2 x 16
Download 100%
DF
I-Joist
4
Code
Ref.
3-1/2 x 11-7/8
3-1/2 x 14
3-1/2 x 12
3-1/2 x 11-1/4
Top
Qty
Face
Qty
Allowable Loads Header Type (Lbs.)
1,3
Dimensions (in)
Joist
Joist Size
(in)
MiTek USP
Stock No.
Web
Stiff
Reqd
H
W
L
TF
D
Continued on next page