Use and Care Manual

ManualsBrandsMiTek ManualsBuilding Hardware2 in. x 2 in. x 4 in. G185 12-Gauge Angle

MiTek

Product Catalog

Code Evaluation Information

Code Reference Column Chart Listing

Most structural products shown in this catalog are listed in a current

code evaluation report from the code evaluation agencies listed.

The load values shown in this catalog were current at the time of

printing but we are continually improving our products through better

engineering design and development so some of the evaluation

reports may have been updated with better load values after the

catalog was printed.

In a few cases, we have submitted a formal independent test report

from an approved lab to the code evaluation agency and are awaiting

on an evaluation report.

We recommend visiting our web site: MiTek-US.com or, the specied

code evaluation agency’s web site, shown below, to obtain the latest

load values from the most current evaluation report.

ICC-ES (ESR), icc-es.org

IAPMO Uniform-ES (ER), iapmoes.org

Florida (Florida Product Approval No.), oridabuilding.org

Some code jurisdictions may require additional load reductions

and/or use limitations for some products listed in this catalog. In

those cases, the products may not be approved or may need further

review for approval.

We recommend contacting the code jurisdiction having authority for

your project to conrm they accept the evaluation reports, or contact

our Engineering Department for further assistance.

Code Reference Chart

Code Evaluation Labeling Requirements:

Labeling products for eld identication is part of our quality assurance

program. Code evaluation agencies require that the label include the

manufacturer’s name or trademark, the model number, and code evaluation

identication number. In addition, there must also be a number to trace the

product back to the steel used in manufacturing.

The primary intent of this labeling is to allow conrmation that the connector

being examined at on the jobsite is code approved. This can be veried by

checking that code evaluation identication number on the code evaluation

agencies website or MiTek-US.com.

Product Identication and Labeling

Each MiTek connector is identied with the following information:

Product Brand: MiTek

MiTek Stock Number: Shows stock number as it

appears in MiTek’s literature and code evaluation reports.

Reference Number: Product number of a competitor that may

be specied.

Code Evaluation Identication Number: The code evaluation

identication number(s) are listed here. ESR-2685 is a general index

report from ICC Evaluation Service, Inc. (ICC-ES) and provides a

convenient cross-reference to many of our ESR reports.

Work Order Number: For structural product traceability.

Corrosion Information: Shows the corrosion resistant nish

of the product.

UPC Code

Color Coding: Black print indicates standard G90 nish.

Green print indicates corrosion resistant nish.

Typical Product Label

JUS28-TZ

Ref# LUS28Z

ESR-2685, LABC, FL17232

21466090 Triple Zinc G-185

MiTek

Code

Reference

Code Evaluation

Agency

Building Code Coverage

IBC

ICC-ES

IAPMO UES

International Building Code (IBC)

International Residential Code (IRC)

State of Florida

Product Approvals

Florida Building Code (FBC)

LA City -

City of Los Angeles,

California

Los Angeles Building Code (LABC)

Los Angeles Residential Code (LARC)

Products have a LABC & LARC

Supplement to their ICC-ES or

IAPMO UES evaluation re

ort

PC Prescriptive Code Prescriptive construction requirements

-- None No Code Listing

Labels are positioned on

products so they can be

seen after installation

5 6