Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware2-1/2" x 11-1/4" - 11-7/8" Steel Face Mount I-Joist Hanger

145

EWP Hangers

I-Joist Charts Face Mount Hangers

Dimensions (in)

Uplift

Joist Size Ref. No. W H D Qty Type Qty Type 100% 115% 125% 160% 100% 115% 125% 160%

THF15925 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF15925 Max 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF15112 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF15112 Max 16 10d 2 10d x 1-1/2 1825 2100 2155 280 1470 1500 1520 235

THF15140 Min 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF15140 Max 20 10d 2 10d x 1-1/2 2100 2135 2155 280 1470 1500 1520 235

THF16925 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF16925 Max 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF16112 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF16112 Max 16 10d 2 10d x 1-1/2 1825 2100 2280 280 1570 1605 1625 235

THF16140 Min 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF16140 Max 20 10d 2 10d x 1-1/2 2255 2290 2310 280 1575 1605 1625 235

THF17925 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF17925 Max 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF17112 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF17112 Max 16 10d 2 10d x 1-1/2 1825 2100 2280 280 1570 1710 1730 235

THF17140 Min 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF17140 Max 20 10d 2 10d x 1-1/2 2280 2445 2470 280 1680 1710 1730 235

1-3/4 x 16 THF17157 IUS1.81/16 -- 18 1-13/16 15-3/4 3-1/2 24 10d 2 10d x 1-1/2 2735 3145 3310 280 2350 2705 2780 235

THF20925 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF20925 Max 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF20112 Min 8 10d 2 10d x 1-1/2 910 1050 1140 280 785 900 980 235

THF20112 Max 16 10d 2 10d x 1-1/2 1825 2100 2280 280 1570 1805 1945 235

THF20140 Min 12 10d 2 10d x 1-1/2 1370 1575 1710 280 1175 1350 1470 235

THF20140 Max 20 10d 2 10d x 1-1/2 2280 2470 2470 280 1895 1925 1945 235

2 - 2-1/8 x 16 THF20157 IUS2.06/16 -- 18 2-1/8 15-3/4 3-3/8 24 10d 2 10d x 1-1/2 2735 3145 3310 280 2350 2705 2780 235

2-5/16 x 9-1/2 THF23925

IUS2.37/9.5,

MIU2.37/9,

U3510/14

-- 18 2-5/16 9-3/16 2-1/2 12 10d 2 10d x 1-1/2 1370 1575 1710 175 1175 1350 1470 150

2-5/16 x 11-7/8 THF23118

IUS2.37/11.88,

MIU2.37/11

-- 18 2-5/16 11-3/16 2-1/2 14 10d 2 10d x 1-1/2 1595 1835 1995 360 1370 1580 1715 310

2-5/16 x 14 THF23140

IUS2.37/14,

MIU2.37/14

-- 16 2-5/16 13-1/2 2-1/2 18 10d 2 10d x 1-1/2 2090 2400 2610 360 1800 2070 2250 310

2-5/16 x 16 THF23160

IUS2.37/16,

MIU2.37/16

-- 16 2-5/16 15-9/16 2-1/2 22 10d 2 10d x 1-1/2 2550 2935 3035 360 2200 2530 2550 310

2-5/16 x 18 - 28 THF23180

MIU2.37/18,

MIU2.37/20

x 16 2-5/16 17-1/8 2-1/2 24 10d 8 10d x 1-1/2 2785 3200 3480 1295 2400 2760 3000 1085

2-1/2 x

9-1/4 - 9-1/2

THF25925 MIU2.56/9 -- 18 2-1/2 9-1/8 2-1/2 12 10d 2 10d x 1-1/2 1370 1575 1710 175 1175 1350 1470 150

2-1/2 x 9-1/2 THFI2595 IUS2.56/9.5 -- 18 2-5/8 9-1/2 2 8 10d -- -- -- -- 960 1095 1180 135 960 1095 1180 115 5, F2

2-1/2 x

11-1/4 - 11-7/8

THF25112 MIU2.56/11 -- 16 2-5/16 13-1/2 2-1/2 14 10d 2 10d x 1-1/2 1595 1835 1995 360 1370 1580 1715 310

5, F2,

2-1/2 x 11-7/8 THFI25118 IUS2.56/11.88 -- 18 2-5/8 11-7/8 2 10 10d -- -- -- -- 1200 1315 1315 135 1200 1335 1335 115 5, F2

2-1/2 x 13 THF25130 -- -- -- 16 2-1/2 12-1/4 2-1/2 18 10d 2 10d x 1-1/2 2090 2280 2280 360 1800 1915 1915 310

5, F2,

)

lift loads have been increased 60% for wind or seismic loads; no further increase shall be

ermitted.

)

Minimum nail

enetration shall be 1-1/2" for 10d nails.

)

NAILS: 10d x 1-1/2" nails are 0.148" dia. x 1-1/2" lon

10d nails are 0.148" dia. x 3" lon

Load tables address han

er/header/fastener limitations onl

. Joist limitations must be determined for each installation.

New

roducts or u

dated

roduct information are desi

nated in blue font.

IUS1.81/11.88

IUS1.81/14

13-1/2

13-7/16

8-15/16

1-5/8

1-3/4

Code

Ref.

F2,

1-1/2 9-1/16 2

1-1/2 11-1/16 2

1-1/2

1-5/8

10-15/16

13-3/8

1-3/4 x 14

1-3/4 x

9-1/4 - 9-1/2

1-3/4 x 11-7/8

1-5/8 x

9-1/4 - 9-1/2

1-5/8 x

11-1/4 - 12

1-5/8 x 14

DF/SP Header

Allowable Loads (Lbs.)

S-P-F Header

Allowable Loads (Lbs.)

USP

Stock No.

-- 18

-- --

Joist

Web

Stiff

Reqd Ga

Fastener Schedule

2,3

Header

MIU1.56/9

18 1-3/4

-- --

IUS1.81/9.5

MIU1.56/11

-- --

1-1/2 x 9-1/2

1-1/2 x

11-1/4 - 11-7/8

1-1/2 x 14

2 - 2-1/8 x 9-1/2

2 - 2-1/8 x

11-7/8

2 - 2-1/8 x 14

11-3/16

13-1/4

2-1/8 8-7/8-- 18

IUS2.06/9.5

IUS2.06/11.88

IUS2.06/14

-- 18

-- 18 2-1/8

2-1/8

Continued on next page

EWP Hangers

Summary of content (3 pages)

PAGE 1
EWP Hangers I-Joist Charts Face Mount Hangers Fastener Schedule2,3 Header Joist Dimensions (in) 2 - 2-1/8 x 16 USP Stock No.
PAGE 2
EWP Hangers I-Joist Charts Face Mount Hangers Fastener Schedule2,3 Joist Header Dimensions (in) 2 - 2-1/8 x 16 USP Stock No.
PAGE 3
EWP Hangers THF Face Mount I-Joist Hangers Designed to provide lateral support for the top chords of I-Joists in depths up to 16". Eliminates the need for web stiffeners in most applications (see Web Stiffener Reqd. column in EWP Face Mount Hanger Chart for specific applications). Materials: See EWP Face Mount Hangers charts, pages 145-146. Finish: G90 galvanizing Options: See Specialty Options chart.