Technical Specifications

ManualsBrandsMiTek ManualsConstruction Hardware2" x 2-1/4" x 5-3/16" Concrete Angle

Holdowns

TDL Concrete Angles

These angles secure wood posts to concrete

or wood oors in light-duty applications.

Materials: 12 gauge

Finish: G90 galvanizing

Options: See Chart for Corrosion Finish Options.

Codes: See page 11 for Code Reference Key Chart

Installation:

• Use all specied fasteners. See Product Notes, page 17.

• The TDL10 can be embedded into concrete. Minimum

embedment depth is 4" to achieve allowable loads.

• Moisture barrier may be required.

• Bolts must be ordered separately.

See page 24 for available sizes.

TDL10

Typical TDL10

embedded interior

installation

Typical TDL5

interior installation

Corrosion Finish

Stainless Steel Gold Coat

HDG Triple Zinc

Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc

Corrosion

Finish

Stainless Steel

Gold Coat

HDG

Triple Zinc

Anchor Bolts

Ref. No.

W H D Qty Qty Type Qty Dia. (in) Nails Bolts

TDL5 A24 12 2 5-3/16 2-1/4 1 1/2 4 16d 1 1/2

TDL10 A311 12 2 9-3/4 2-1/4 1 1/2 4 16d 1 1/2

1) Allowable loads are based on the use of either nails or bolts; nail and bolt values cannot be combined.

2) The bolt values are based on single shear with a minimum member thickness of 3-1/2".

3) Allowable loads have been increased in accordance with the code; no further increase shall be permitted.

4) Minimum nail embedment shall be 1-5/8" for 16d nails.

5) Designer must specify anchor bolt type, length, and embedment.

NAILS:

16d nails are 0.162" dia. x 3-1/2" long.

955 1105

Bolts

Strap

130

Corrosion

Finish

USP

Stock No.

Dimensions (in)

Nails

Code

Ref.

Fastener Schedule

4,5,6

Uplift 160%

Steel

Gauge

DF/SP

Allowable Loads (Lbs.)

1,2,3

Dia.

(in)

4" min.

embedment

Holdowns