Technical Specifications

219
Deck & Fences
© 2015 MiTek. All rights reserved.
PCP Plastic Post Caps
Deck & Fences
SMP
PCP66
BD
SFP30
Typical PCP44
installation
Typical BD
installation
Typical SMP
installation
Typical SFP30
installation
These seamless caps keep water off post tops, protecting wood from
moisture damage. The PCP’s plastic construction is corrosion-proof
and paintable. Not available in rough or full lumber sizes.
Materials: Hi-impact plastic
Finish: Gray
Codes: See page 11 for Code Reference Chart
Installation:
• Fasten cap to post top with (1) 8d HDG or 10d HDG nail.
SFP / SMP Fence Post Connectors
BD Bolt Down
Take the work out of fence post installation and repair with the Speedpost,
SFP30, and Speedmender, SMP. The Speedpost is used to install 4 x 4 fence
posts without digging post holes or pouring concrete. The Speedmender
plates act as reinforcement brackets for rotted or damaged 4 x 4 fence posts.
SFP30 – For 6' nominally-sized 4 x 4 fence posts.
SMP – For nominally-sized 4 x 4 posts.
Materials: 13 gauge
Finish: Paint
Patent: #7,152,841
Codes: See page 11 for Code Reference Chart
Installation:
• Step-by-step installation instructions are labeled onto each product.
Anchors 4 x 4 post to wood or concrete surfaces.
Materials: 13 gauge
Finish: Paint
Patents: #7,152,841
Codes: See page 11 for Code Reference Chart
Installation:
• Use all specied fasteners. See Product Notes, page 17.
Dimension (in)
Ref. No. W Color
4 x 4 PCP44 DPPC4BK 3-5/8 Gray
6 x 6 PCP66 DPPC6BK 5-5/8 Gray
1) Not available in rough or full lumber sizes.
Post /
Column
Size
1
USP
Stock No.
Code
Ref.
120
Ref. No.
Qty
Type
SFP30 FPBS44 13 3 1/4" HDG Lag Bolts
SMP
1
FPBM44E 13 20 10d
1) Fastener schedule is per pair of SMP's.
2)
NAILS:
10d nails are 0.148" dia. x 3" long.
Post
Size
4 x 4
USP
Stock No.
Code
Ref.
120
Steel
Gauge
Fastener Schedule
2
Post Size Ref. No. Qty Lag Bolts
4 x 4 BD FPBB44 13 3 1/4" x 1-1/2" HDG 120
USP
Stock No.
Steel
Gauge
Fastener Schedule
Code
Ref.
5-5/8"
4"
W
W
30"
28-1/16"
5-5/8"
4"