Technical Specifications

ManualsBrandsMiTek ManualsFasteners & Connectors16D x 3-1/2" Ring Shank Joist Hanger Nail - 50 lb. Box

Fasteners

MiTek

TECO

™

33º Collated Nails

MiTek has reintroduced MiTek

TECO

™

nails with the introduction of 33° collated pneumatically

driven nails. The color coded head-ID stamp system makes it easy to verify the proper nail has

been used. The 33° collated nails can serve as an alternate to hand-driven installation of the

following nails and may be used with many USP products.

Materials: ASTM F1667, A153 and A580

Finish: Bright, Hot-dip galvanized, Stainless Steel

Codes: See page 11 for Code Reference Key Chart

Installation:

• Can be used in a wide variety of pneumatic nail guns with nail locating ability.

• Follow manufacturer’s instructions for proper use of gun and proper safety equipment.

• Install all specified fasteners per catalog.

• Do not overdrive nails.

Finish

Size Ref. No. Head ID Length

8d x 1-1/2 NA8DHDGPT N8HDGPT 0.131 1-1/2

8d Common N8CHDGPT -- -- 0.131 2-1/2

10d x 1-1/2 NA10DHDGPT -- -- 0.148 1-1/2

10d Common N10CHDGPT N10DHDGPT 0.148 2-1/2

16d x 2-1/2 NA16DHDGPT N16HDGPT 0.162 2-1/2

10d x 1-1/2 SSNA10DPT T9A150MCN -- -- 0.148 1-1/2

10d Common SSN10CPT T9A250MCN -- -- 0.148 2-1/2

16d x 2-1/2 SSNA16DPT -- -- -- -- 0.162 2-1/2

8d x 1-1/2 NA8DRPT -- -- 0.131 1-1/2

8d Common N8CRPT -- -- 0.131 2-1/2

10d x 1-1/2 NA10DRPT -- -- 0.148 1-1/2

10d Common N10CRPT -- -- 0.148 2-1/2

16d x 2-1/2 NA16DRPT -- -- 0.162 2-1/2

1) HDG = Hot-Dip Galvanized; SS = Stainless Steel; Bright = No Finish.

New products or updated product information are desi

nated in blue font.

Dimensions (in)

USP

Stock No.

Nail

Diameter

Bright

Code

Ref.

HDG

HDG 33° Nails

Bright 33° Nails

Fasteners