Technical Specifications

226
General Hardware
© 2015 MiTek. All rights reserved.
SB12 Shelf Brackets
This shelf bracket combines shelving capabilities
and closet rod support in a one-piece design.
Materials: 13 gauge
Finish: Zinc Plated
Codes: See page 11 for Code Reference Chart
Typical SB12 installation
Typical KSCT68 installation
SB12
KSCT68
Ref. No. Qty Type
SB12 SBV 13 8 10d 120
1
)
NAILS: 10d nails are 0.148" dia. x 3" lon
g
.
USP
Stock No.
Steel
Gauge
Code
Ref.
Fastener Schedule
1
The Corner Tie secures three-way wood-to-wood
connections. Handy for building workbenches, utility
tables, or shelving using 2x4 lumber.
Materials: 14 gauge
Finish: G90 galvanizing
Codes: See page 11 for Code Reference Chart
Installation:
• Use (12) #10 panhead screws to fasten the KSCT68
to wood framing.
KSCT68 Corner Tie
Ref. No.
Qty
Screws
KSCT68 -- -- 14 12 #10 panhead 120
USP
Stock No.
Steel
Gauge
Code
Ref.
Fastener Schedule
General Hardware
11"
11"
12"
6"
8"
2"
Typical WT22
installation
WT22
WT22 Wall Tie
Materials: 22 gauge
Finish: G90 galvanizing
Options: See chart for Corrosion Finish Options
Codes: See page 11 for Code Reference Chart
Installation:
• Use nails appropriate for intended use. See Product
Notes, page 17.
• The opposite end must be bonded in the mortar joint of
brick facade.
• Check local codes for spacing requirements.
• Wall tie shall be bent at nail, bonding into mortar joint.
Ref. No. Description W L Qty Type
WT22 BTB Straight Edge - Duplex 22 7/8 6-1/2 1 10d 120
1)
NAILS:
10d nails are 0.148" dia. x 3" long.
Code
Ref.
USP
Stock No.
Steel
Gauge
Corrosion
Finish
Fastener
Schedule
1
Dimensions (in)
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
1" space
between brick
and sheathing
6-1/2"
7/8"