Technical Specifications

218
Deck & Fences
© 2015 MiTek. All rights reserved.
ERB24 / FB / FRB Fence Brackets
Deck & Fences
ERB24 – Designed to mount prefabricated
fence sections and works with 2x4
horizontal section rails.
FB26 – Secures 2x6 rails to wood posts.
FRB24 – Secures continuous 2x4 rails
to wood posts. Pre-punched holes allow
installers to splice 2x4 rail ends within
the bracket.
Materials: See chart
Finish: G-185 galvanizing
Codes: See page 11 for
Code Reference Chart
Installation:
• Use all specied fasteners.
See Product Notes, page 17.
Rail Size Ref. No W H Qty Type Qty Type 100% 115% 100% 115%
1 x 4 FB14-TZ -- -- 20 3/4 3-1/2 3 14 ga. x 3/4 HDG 2 8d x 1-1/2 HDG -- -- -- -- -- -- -- --
2 x 3 FB23-TZ -- -- 20 1-9/16 2-3/8 3 8d x 1-1/2 HDG 4 8d x 1-1/2 HDG -- -- -- -- -- -- -- --
ERB24-TZ -- -- 18 1-1/2 3-9/16 4 8d HDG 3 8d HDG -- -- -- -- -- -- -- --
FB24-TZ
FB24, FB24Z,
FBR24, FBR24Z
20 1-9/16 3-3/8 2 8d HDG 2 8d HDG -- -- -- -- -- -- -- --
FRB24-TZ -- -- 18 1-9/16 3-9/16 2 10d x 1-1/2 HDG 4 10d HDG -- -- -- -- -- -- -- --
4 10d x 1-1/2 HDG 4 10d x 1-1/2 HDG 330 330 350 400
4 LL915 4 LL915 315 360 315 360
1) Allowable loads have been increased 15% for short duration loading. No further increase is permitted.
2) Minimum nail penetration shall be 1-1/8" for 6d nails, 1-5/16" for 8d nails, and 1-1/2" for 10d nails.
3)
NAILS:
6d nails are 0.120" dia. x 2" long, 8d x 1-1/2" nails are 0.131" dia. x 1-1/2" long, 8d nails are 0.131" dia. x 2-1/2" long,
10d x 1-1/2" nails are 0.148" dia. x 1-1/2" long, 10d nails are 0.148" dia. x 3" long, LL915 denotes a LumberLok screw #9 x 1-3/8" long.
New products or updated product information are designated in
blue font
.
FB26
Corrosion
Finish
18
Code
Ref.
2 x 4 120
Rail Post
1-9/16 5
USP
Stock No.
Steel
Gauge
Dimensions (in)
Fastener Schedule
2,3
Download F1
2 x 6
DF/SP
Allowable Loads (Lbs)
1
FB26-TZ
FB24-TZ
FB26-TZ
FB14-TZ
Typical FB24-TZ
installation
Typical FB26-TZ
installation
FB23-TZ
ERB24-TZ
FRB24-TZ
Typical ERB24-TZ
installation
Typical FRB24-TZ
installation
W
1-3/16"
1-9/16"
H
H
3/4"
W
W
H
H
Corrosion Finish
Stainless Steel Gold Coat
HDG Triple Zinc
Corrosion Finish Stainless Steel Gold Coat HDG Triple Zinc
Corrosion
Finish
Stainless Steel
Gold Coat
HDG
Triple Zinc
W