SDS

P261 Avoid breathing vapor/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P321 Specific treatment (see medical advice on this label).
P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362
+P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/container in accordance with national regulations.
Contains
TRIETHYLENE GLYCOL DIMETHACRYLATE
3. Composition/information on ingredients
Mixtures
QUARTZ SAND
20-50%
CAS number: 14808-60-7
Classification
Not Classified
TRIETHYLENE GLYCOL DIMETHACRYLATE
10-20%
CAS number: 109-16-0REACH registration number: 01-2119969287-21-XXXX
Classification
Skin Sens. 1B - H317
CRYSTALINE SILICA
10-20%
CAS number: 14808-60-7
Classification
STOT RE 2 - H373
TITANIUM DIOXIDE
>0.5 <1.0%
CAS number: 13463-67-7REACH registration number: 01-2119489379-17-XXXX
Classification
Not Classified
The Full Text for all Hazard Statements are Displayed in Section 16.
4. First-aid measures
Description of first aid measures
Inhalation
Move affected person to fresh air at once. Get medical attention if any discomfort continues.
Ingestion
Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse mouth thoroughly with water. Get
medical attention if any discomfort continues.
Skin Contact
Remove affected person from source of contamination. Remove contaminated clothing. Wash skin thoroughly with soap and
water. Get medical attention if any discomfort continues.
Eye contact
Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least
15 minutes. Get medical attention if irritation persists after washing. Show this Safety Data Sheet to the medical personnel.
2/9
Revision date: 5
/21/2015 Supersedes date: 1/05/2013Revision: 2
CIA-EA Adhesive Anchor System part A