User`s manual

-20-
5. POINT SETTER inspection & operation test (Recommend Monthly
Test)
No Measures required result
1 inspect the outside look no damage, no dirt or no looseness any parts
2
inspect the air hoses
and connectors
no damage
all connectors are connected accurately
3
inspect the nitrogen gas
or air pressure supply
６kgf/cm
２
～８kgf/cm
２
or 6.2 to 7.9 bar
(or 90 – 115 psi) Never exceed maximum pressure
4
Inspect the retention. If
Point Setter does not
hold 2 kg or more
before brakes slip
return the unit to
factory for repair
Retention >2kg or greater of brake 2, 3, 4, & 5