User Guide

8965 N/B Maintenance

6. Disconnect the cable from the system board, then separate the inverter board’s cable and the antenna from the

housing. (Figure 2-16)

7. Remove the four screws, then free the LCD assembly. (Figure 2-17)

Figure 2-16 Free the cables Figure 2-17 Free the LCD assembly

1. Attach the LCD assembly to the base unit and secure with four screws.

2. Replace the antenna back into Mini PCI compartment.

3. Reconnect the two cables to the system board.

4. Replace the two hinge covers.

5. Replace the DDR cover. (Refer to the step 2 of section 2.3.5 Reassembly)

6. Replace the CPU cover. (Refer to the step 3 of section 2.3.3 Reassembly)

7. Replace the keyboard and battery pack. (Refer to sections 2.3.2 and 2.3.1 Reassembly)

Reassembly

MiTac Secret

Confidential Document