User Guide

8965 N/B Maintenance

1. To install the DDR, match the DDR's notched part with the socket's projected part and firmly insert the

SO-DIMM into the socket at 20-degree angle. Then push down until the retaining clips lock the DDR into

position.

2. Replace the DDR cover and secure with three screws.

3. Replace the battery pack. (See section 2.3.1 Reassembly)

Disassembly

1. Carefully put the notebook upside down. Remove the battery pack. (See section 2.3.1 Disassembly)

2. Remove the three screws fastening the DDR cover. (Figure 2-12)

2.3.5 DDR-SDRAM

3. Pull the retaining clips outwards () and remove the SO-DIMM (). (Figure 2-13)

Reassembly

Figure 2-13 Remove the SO-DIMMFigure 2-12 Remove the three screws

MiTac Secret

Confidential Document