User Guide

8965 N/B Maintenance
8965 N/B Maintenance
118
1. Check if the Mini-PCI CARD device
is installed properly.
2. Confirm Mini-PCI driver is installed ok.
Test
OK?
Re-test
OK?
Yes
No
Yes
No
Change the faulty
part then end.
Try another known good
Mini-PCI card device.
Correct it
Replace
Motherboard
Board-level
Troubleshooting
An error occurs when a PC card device is installed.
Check the following parts for cold solder or one of the following
parts on the mother-board may be defective, use an oscilloscope
to check the following signal or replace the parts one at a time and
test after each replacement.
+5V
+3V
PCI_AD[0..31]
PCI_C/BE#[0..3]
MINIPCI_PD
PCI_GNT2#
PCICLK_MINIPCI
PCI_REQ2#
PCI_IRDY#
PCLKRUN#
8.10 Mini-PCI Socket Test Error (1)
PCI_SERR#
PCI_PERR#
PCI_INTD#
MINIPCI_PCIRST#
PCI_PAR
PCI_FRAME#
PCI_TRDY#
PCI_STOP#
PCI_DEVSEL#
Mini-PCI Socket
Test Error
U711
J717
Q711
R944
R952
R957
R942
R938
R932
R941
R939
Parts:
Signals
MiTac Secret
Confidential Document