Service manual

72
8575
8575
A N/B Maintenance
A N/B Maintenance
6. Disconnect the LCD cables from the system board, and remove four screws of the hinges. Now you can
separate the LCD assembly from the base unit. (Figure 2-17)
Figure 2-17 Remove cables and screws
to separate LCD
1. Attach the LCD assembly to the base unit and secure with four screws on the hinges.
2. Replace the antenna to the SO-DIMM socket.
3. Reconnect the LCD cable connectors to the system board.
4. Fit the easy start button board and secure with tow screws.
5. Replace two hinge cover, the heatsink, keyboard and easy start buttons cover.
Reassembly