Service manual

115
8575
8575
A N/B Maintenance
A N/B Maintenance
5.6 uPD72872 IEEE1394 Controller
PCI/Cardbus Interface Signals: (52 pins) Continue
Name I/O PIN NO. IOL Volts(V) Function Block*
PERR
I/O 41 PCI/Cardbus 5/3.3 Parity Error is used for
reporting data parity errors
during all PCI transactions,
except a Special Cycle.
It is an output when
AD0-AD31 and PAR are
both inputs. It is an input
when AD0-AD31 and PAR
are both outputs.
Link
SERR
O 42 PCI/Cardbus 5/3.3 System Error is used for
reporting address parity
errors, data parity errors
during the Special Cycle, or
any other system error
where the effect can be
catastrophic. When reporting
address parity errors, it is an
output.
Link
PRST
I 5 - 5/3.3 Reset PCI reset Link
PCLK
I 6 - 5/3.3 PCI Clock 33 MHz system
bus clock.
Link
Remark *: If the Link pin is pulled up, it should be connected to L_VDD.